Vacon 100 Applications Manual

•
ID 1772 Run Time Counter (years)
•
ID 1773 Run Time Counter (days)
•
ID 1774 Run Time Counter (hours)
•
ID 1775 Run Time Counter (minutes)
•
ID 1776 Run Time Counter (seconds)
Example: You receive the value 1a 143d 02:21 of the run time counter from the fieldbus.
•
ID1772: 1 (years)
•
ID1773: 143 (days)
•
ID1774: 2 (hours)
•
ID1775: 21 (minutes)
•
ID1776: 0 (seconds)
9.19.4 POWER ON TIME COUNTER
The power on time counter of the power unit is in the submenu Total counters. It is not
possible to reset the counter. The value of the counter has 5 different 16-bit values. To read
the value of the counter through fieldbus, use these ID numbers.
•
ID 1777 Power On Time Counter (years)
•
ID 1778 Power On Time Counter (days)
•
ID 1779 Power On Time Counter (hours)
•
ID 1780 Power On Time Counter (minutes)
•
ID 1781 Power On Time Counter (seconds)
Example: You receive the value 1a 240d 02:18 of the power on time counter from the fieldbus.
•
ID1777: 1 (years)
•
ID1778: 240 (days)
•
ID1779: 2 (hours)
•
ID1780: 18 (minutes)
•
ID1781: 0 (seconds)
9.19.5 ENERGY COUNTER
The energy counter counts the total quantity of energy that the drive gets from the supply
network. The counter cannot be reset. To read the value of the counter through fieldbus, use
these ID numbers.
ID 2291 Energy Counter
The value has always 4 digits. The format and the unit of the counter change to agree with
the energy counter value. See the example below.
Example:
VACON · 316 PARAMETER DESCRIPTIONS
9
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205

Vacon 100 Specifications

General

Product type	AC Drive
Enclosure class	IP20
EMC filter	Built-in
Power	0.25 kW - 5.5 kW
Cooling method	Fan
Braking chopper	Optional