Vacon 100 - Page 147

Table 57: Digital output settings on standard I/O board
Index Parameter Min Max Unit Default ID Description
P3.5.3.2.4 Basic R02 Function 0 56 3 * 11004 See P3.5.3.2.1.
P3.5.3.2.5 Basic R02 ON Delay 0.00 320.00 s 0.00 11005 See M3.5.3.2.2.
P3.5.3.2.6 Basic R02 OFF Delay 0.00 320.00 s 0.00 11006 See M3.5.3.2.3.
P3.5.3.2.7 Basic R03 Function 0 56 1 * 11007
See P3.5.3.2.1. Not
visible if only 2 output
relays are installed.
* = The selection of the application with parameter P1.2 Application gives the default value.
See the default values in Chapter 11 Appendix 1.
THE DIGITAL OUTPUTS OF THE EXPANDER SLOTS C, D AND E
Shows only the parameters for the outputs on option boards in slots C, D and E. Make the
selections as in Basic RO1 Function (P3.5.3.2.1).
This group or these parameters are not visible if there are no digital outputs in slots C, D or
E.
PARAMETERS MENU VACON · 147
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
5