Vacon 100 - Page 209

Table 108: The basic I/O parameters in the I/O and Hardware menu
Index Parameter Min Max Unit Default ID Description
V5.1.1 Digital Input 1 0 1 0
Status of the digital
input signal
V5.1.2 Digital Input 2 0 1 0
Status of the digital
input signal
V5.1.3 Digital Input 3 0 1 0
Status of the digital
input signal
V5.1.4 Digital Input 4 0 1 0
Status of the digital
input signal
V5.1.5 Digital Input 5 0 1 0
Status of the digital
input signal
V5.1.6 Digital Input 6 0 1 0
Status of the digital
input signal
V5.1.7
Analogue Input 1
Mode
1 3 3
Shows the mode that is
set for the analogue
input signal. The
selection is made with
a DIP switch on the
control board.
1 = 0...20mA
3 = 0...10V
V5.1.8 Analogue Input 1 0 100 % 0.00
Status of the analogue
input signal
V5.1.9
Analogue Input 2
Mode
1 3 3
Shows the mode that is
set for the analogue
input signal. The
selection is made with
a DIP switch on the
control board.
1 = 0...20mA
3 = 0...10V
V5.1.10 Analogue Input 2 0 100 % 0.00
Status of the analogue
input signal
I/O AND HARDWARE MENU VACON · 209
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
7