Table 120: The output signals through RO1
Selection
number
Selection name Description
22
ExtPID feedback supervision The External PID controller feedback value is not in the
supervision limits.
23
Input pressure alarm The input pressure of the pump is below the value that was
set with parameter P3.13.9.7.
24
Frost protection alarm The measured temperature of the pump is below the level
that was set with parameter P3.13.10.5.
25 Motor 1 control The contactor control for the Multi-pump function.
26 Motor 2 control The contactor control for the Multi-pump function.
27 Motor 3 control The contactor control for the Multi-pump function.
28 Motor 4 control The contactor control for the Multi-pump function.
29 Motor 5 control The contactor control for the Multi-pump function.
30 Motor 6 control The contactor control for the Multi-pump function.
31 Time channel 1 The status of Time channel 1.
32 Time channel 2 The status of Time channel 2.
33 Time channel 3 The status of Time channel 3.
34
Fieldbus Control Word bit 13 The digital (relay) output control from the Fieldbus control
word bit 13.
35
Fieldbus Control Word bit 14 The digital (relay) output control from the Fieldbus control
word bit 14.
36
Fieldbus Control Word bit 15 The digital (relay) output control from the Fieldbus control
word bit 15.
37
Fieldbus Process Data In1 bit 0 The digital (relay) output control from the Fieldbus Process
Data In1, bit 0.
38
Fieldbus Process Data In1 bit 1 The digital (relay) output control from the Fieldbus Process
Data In1, bit 1.
39
Fieldbus Process Data In1 bit 2 The digital (relay) output control from the Fieldbus Process
Data In1, bit 2.
40
Maintenance counter 1 alarm The maintenance counter reached the alarm limit that is set
with parameter P3.16.2.
41
Maintenance counter 1 fault The maintenance counter reached the alarm limit that is set
with parameter P3.16.3.
42 Mechanical brake control The Open mechanical brake command.
VACON · 270 PARAMETER DESCRIPTIONS
9
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205