Vacon 100 - Page 331

Fault
code
Fault ID Fault name Possible cause How to correct the fault
33 320 Fire mode enabled The Fire mode of the drive is
enabled. The protections of
the drive are not used. This
alarm is reset automatically
when Fire mode is disabled.
Do a check of the parameter
settings and the signals. Some of
the protections of the drive are
disabled.
37 361 Device changed
(same type)
The power unit was
replaced by a new one that
has the same size. The
device is ready to be used.
The parameters are
available in the drive.
Reset the fault. The drive reboots
after you reset the fault.
362 Device changed
(same type)
The option board in slot B
was replaced by a new one
that you have used before in
the same slot. The device is
ready to be used.
Reset the fault. The drive starts to
use the old parameter settings.
363 Device changed
(same type)
The same cause as in ID362,
but refers to Slot C.
364 Device changed
(same type)
The same cause as in ID362,
but refers to Slot D.
365 Device changed
(same type)
The same cause as in ID362,
but refers to Slot E.
38 372 Device added (same
type)
An option board was put into
slot B. You have used the
option board before in the
same slot. The device is
ready to be used.
The device is ready for use. The
drive starts to use the old
parameter settings.
373 Device added (same
type)
The same cause as in ID372,
but refers to Slot C.
374 Device added (same
type)
The same cause as in ID372,
but refers to Slot D.
375 Device added (same
type)
The same cause as in ID372,
but refers to Slot E.
39 382 Device removed An option board was
removed from slot A or B.
The device is not available. Reset
the fault.
383 Device removed The same cause as in ID380,
but refers to Slot C
384 Device removed The same cause as in ID380,
but refers to Slot D
385 Device removed The same cause as in ID380,
but refers to Slot E
FAULT TRACING VACON · 331
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
10