NOTE!
The Multimonitor menu is not available in the text display.
TREND CURVE
The Trend Curve function is a graphical presentation of 2 monitor values at the same time.
See 4.1.2 Trend curve.
BASIC
The basic monitoring values can include statuses, measurements, and the actual values of
parameters and signals. See 4.1.3 Basic.
I/O
It is possible to monitor the statuses and levels of the values of input and output signals. See
4.1.4 I/O.
EXTRAS/ADVANCED
You can monitor different advanced values, for example fieldbus values. See 4.1.6 Extras and
advanced.
TIMER FUNCTIONS
With this function, you can monitor the timer functions and the Real Time Clock. See 4.1.7
Timer functions monitoring.
PID CONTROLLER
With this function, you can monitor the PID controller values. See 4.1.8 PID controller
monitoring.
EXTERNAL PID CONTROLLER
Monitor the values that are related to the external PID controller. See 4.1.9 External PID
controller monitoring.
MULTI-PUMP
Use this function to monitor the values that are related to the operation of more than 1 drive.
See 4.1.10 Multipump monitoring.
MAINTENANCE COUNTERS
Monitor the values related to the maintenance counters. See 4.1.11 Maintenance counters.
FIELDBUS DATA
With this function, you see the fieldbus data as monitor values. Use this function, for
example, for monitoring during the fieldbus commissioning. See 4.1.12 Fieldbus data
monitoring.
USER INTERFACES VACON · 95
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
3
To Next Page
Loading...
