Weber ALPHA COMPACT - Blow Delay; Blow Delay: 000; Blow Time

Chapter 8 System Options Alpha Compact 32708612
Version: 14.12.2012 page 104 of 135
020 BLOW DELAY: 000
This configuration parameter delays the blow-off by the adjusted value. The adjustment
will be ignored when the previous parameter „BLOW TRIGGER“ is set on “000“.
 Push [Enter] to edit the configuration parameter (in case of password query see
page 91).
 Push the *buttons [] or [] to increase or reduce the parameter value.
(unit = value x 10ms, value "000" = no delay).
 Push [Enter] to save the value.
 Push the buttons [] or [] to get to the next configuration parameter.
 Push [Start] or [Stop] to leave the parameter setting.
021 BLOW TIME
The blow time and thus the duration of the blow-off valve`s activation for the transfer of
the label on to the product is determined. The allowed range is between 010 and 255
(value x 1ms).
 Push [Enter] to edit the configuration parameter (in case of password query see
page 91).
 Push the *buttons [] or [] to increase or reduce the parameter value.
(unit = value x 1ms, value "000" Tamp-On mode).
 Push [Enter] to save the value.
 Push the buttons [] or [] to get to the next configuration parameter.
 Push [Start] or [Stop] to leave the parameter setting.
*Fast forward-function when pushing the button [] or [].
CONFIGURATION 020
BLOW DELAY. 000
CONFIGURATION 021
BLOW TIME 000