Chapter 9 Maintenance Alpha Compact 32708612
Version: 14.12.2012 page 120 of 135
Weekly Maintenance (After Approx. 40 Hours of Operation)
Requirements
Labeler is free of energy (free of power and *²air pressure)
No supply of products
Required Resources
Roller solvent (*21800977)
Alcohol (*21800915)
Lint-free cloth (*21800978)
Label remover (*21800771)
Compressed air spray (*21800768)
Soft brush (round or plain approx. 10 mm)
* Product recommendation! Can be ordered at the Bluhm Weber Group by 8-digit article number.
Instruction
Please arrange the weekly maintenance as follows.
*² Only if system is equipped accordingly.
Step Procedure
1
Clean labeler according to the cleaning instructions.
2
*²Check / clean the air filter from the protective cabinet.
3
Clean all sensors (product sensor, low label sensor and label gap sen-
sor) carefully with a soft brush or compressed air. .
4
Examine all roller assemblies for free rotation, if the axes of the rollers
are fixed and correct, if necessary.