Chapter 2 Safety Regulations Alpha Compact 32708612
Version: 14.12.2012 page 14 of 135
2. Safety Regulations
Behavior in Case of an Emergency
The operating personnel have to be familiar with the operation and the location of safety,
accident notification-, first aid- and rescue devices.
What to do in Case of an Emergency?
If persons or parts of the body or items are jammed in swing parts of the labeler
separate the labeler immediately from air pressure and power supply.
Initiate immediately all required emergency measures for injured persons. Observe
valid safety regulations in any case in order to avoid further damages to persons.
Call medical attendance for injured persons.
Eliminate all accident causes.
General Safety Regulations
Safety regulations provide information in written and symbol form in order to warn you
against dangers and to instruct you to avoid any damage to persons or to properties.
Safety regulations are started by signal words indicating the level of danger.
Safety regulations may be placed directly at the labeler or in documents about this labeler.
Explanation of Danger Degrees
This symbol indicates a hazardous situation which, if not avoided,
will result in death or serious injury. All safety regulations have to
be observed to avoid any damage to persons.
This symbol indicates a hazardous situation which, if not avoided,
could result in death or serious injury. All safety regulations have
to be observed to avoid any damage to persons.
This symbol indicates a hazardous situation which, if not avoided,
may result in minor or moderate injury. All safety regulations have
to be observed to avoid any damage to persons.
This symbol indicates a hazardous situation which, if not avoided,
may result in damage to properties. All safety regulations have to
be observed to avoid any damage to properties.
To Next Page
Loading...
Need help?
General
