Chapter 9 Maintenance Alpha Compact 32708612
Version: 14.12.2012 page 116 of 135
9. Maintenance
Safety Instructions
Danger caused by direct or indirect contact to live parts
DANGER TO LIFE!
Contact of persons with live parts which are energized by failures.
Disconnect the power from the machine before you perform
any work at the labeler.
*²Danger caused by actively triggered movements.
DANGER OF BEING CRUSHED!
Dependent on the application the products are transferred manu-
ally or automatically to the labeler.
Perform maintenance work only if you have control of product
supply and there is no danger.
Health Hazard due to highly combustible lubricants and de-
tergents.
HEALTH HAZARD
Bin is under pressure and has inflammable content.
Protect bin against sun radiation and temperatures higher than
50°C.
Do not open after use.
Do not sprinkle against flames or glowing items.
Keep away from ignition sources.
Do not smoke.
Health Hazard due to inappropriate handling of lubricants
and detergents.
HEALTH HAZARD
For used lubricants and detergents, the valid information of the
safety data sheets of the manufacturers and the valid safety- and
disposal regulations have to be observed and followed for each
product.
To Next Page
Loading...
Need help?
General
