Chapter 6 Installation and Initial Operation Alpha Compact 32708612
Version: 14.12.2012 page 33 of 135
Storage Conditions
The environmental conditions for storage of the labeler relate to them of the normal opera-
tion. Details see chapter "Technical Data".
Instruction
Please store the labeler safety as follows:
Step Procedure
1
Label material has to be removed from system.
2
Fix the labeler on pallet(s) and transport the system to its storage place,
consider for protection and transport the remarks from above-mentioned
section "Transport and Unpackaging".
3
For dust protection, cover the labeler with a cotton cloth or a paper towel.
In order to avoid condensate formation, foils may not be used.
4
Before restarting the system, a check of the labeler is required.
To Next Page
Loading...
Need help?
General
