Weber ALPHA COMPACT User Manual

Chapter 8 System Options Alpha Compact 32708612
Version: 14.12.2012 page 88 of 135
EVENT COUNTER
Using this function a number of different event counters can be called up. These provide
useful statistic information about the events which are counted automatically during label-
ing operation.
Event Counter Information
E00
Number of all stopped applying cycles without failures
E01 until
E22
Number of failures of the certain error code
EV1
*Number of printed labels
EV2
*Number of all extension movements of the cylinder.
EV3
*Number of blow off events
EV4
*Number of all communication failures (incl. autom. restored failures)
EV5
*Maintenance counter increases by 1 after the completion of 256 applying cycles
*All counter values are stored in the memory of the labeler. The time at which to store the counter reading happens during a failure
or in stand-by mode. This means if the system is switched off in “READY”-Mode, the counter reading of EV1-EV5 can differ ex-
tremely from the actual counted values.
 Push the *buttons [] or [] to change to the next parameter.
 Push [Enter] to get to the event counters.
 Push the buttons [] or [] to get to the next event counter.
 Push [Start] or [Stop] to leave the parameter settings.
*Fast forward-function when pushing the button [] or [].
FUNCTION-MENU
EVENT-COUNTER
E00=00000
E01=00000
.
.
E22=00000
EV5=00000
EV1=00000000
.
.
EV4=00000000
5-digit counter,
maximum value = 65535
(afterwards begin with 00000)
8-digit counter
Maximum value: 99999999
(
afterwards be
g
in with 00000000
)

Weber ALPHA COMPACT Specifications

General

Brand	Weber
Model	ALPHA COMPACT
Category	Label Maker
Language	English