WTI TSM Series User Manual

5-7
Basic Configuration
• ManagementUtility: Enables/Disables the Device Management Utility (DMU.)
When enabled, the DMU allows you to manage multiple WTI units via a single
menu. (Default = Off.) For more information on the DMU, please refer to the DMU
User's Guide, which can be found on the WTI website at:
http://www.wti.com/t-product-manuals.aspx
Note:AlthoughtheManagementUtilitycanbeenabled/disabledviaeitherthe
WebBrowserInterfaceandTextInterface,theManagementUtilitycanonlybe
accessedandoperatedviatheWebBrowserInterface.
• ScriptingOptions: Provides access to parameters that are used to set up the
TSM/RSM unit for running various scripts as described in Section 5.3.5.
Note:IntheTextInterface,theScriptingOptionssubmenuisaccessedvia
item12.ToaccesstheScriptingOptionsparametersviatheWebBrowser
Interface,placethecursoroverthe"GeneralParameters"link,waitfortheflyout
menutoappear,thenclickonthe"ScriptingOptions"link.
• PowerConfiguration: (RSM-8R8-CM Series Only) In the Web Browser Interface,
the Voltage Calibration parameter, Power Factor parameter and Power Efficiency
parameter are defined via the System Parameters Menu. In the Text Interface,
these parameters reside in a separate submenu, which is accessed via the Power
Configuration option. For more information on Power Configuration, please refer to
Section 5.3.6.
• EnergyWiseConfiguration: (RSM-8R8 Series Units Only) Defines parameters that
are needed in order for an RSM-8R8 Series unit to serve as an element in a Cisco
®
EnergyWise™ network. This item allows the following parameters to be defined:
Note:TheEnergyWiseConfigurationoptionsareonlyavailableonRSM-8R8
Seriesunits.TheEnergyWiseConfigurationoptionsarenoteavailableonTSM/
RSMunitsthatdonotincludeswitchedpoweroutlets.

Enable: Enables/disables the RSM-8R8 unit's ability to particapate in a Cisco
Energywise network. (Default = Off)

Domain: The Energywise Domain Name; up to eighty characters long.
(Default = Undefined)

Secret: A password that is used to authenticate each element in a Cisco
Energywise network. The Secret parameter can be up to eighty characters long.
(Default = Undefined)
• SerialNumber: Allows the serial number for the TSM/RSM unit to be saved and
displayed. When this parameter is defined, the serial number can be displayed via
the Product Status screen in the Web Browser or by invoking the /J* command in
the Text Interface. Since the serial number plate on the TSM/RSM unit is not always
easily accessible after installation, it is often helpful to define the serial number here
in order to simplify the process of determining the serial number later.
(Default = undefined)

WTI TSM Series Specifications

General

Brand	WTI
Model	TSM Series
Category	Remote Control
Language	English