WTI TSM Series - Page 93

5-64
Basic Configuration
 PortAccess: Determines the default Port Access setting for new TACACS users.
The Port Access setting determines which serial ports each account will be
allowed to control. (Defaults; Administrator and SuperUser = All Ports On,
User = undefined, ViewOnly = undefined)
Notes:
• AdministratorandSuperUserlevelaccountsalwayshaveaccesstoallports.
• Userlevelaccountswillonlyhaveaccesstoportsspecifiedviathe"Port
Access"parameter.
• ViewOnlylevelcanviewtheconnectionstatusofpermittedserialports,but
arenotallowedtocreateconnectionsbetweenports.
 PlugAccess: (RSM-8R8 Series Units Only) Determines the default Plug Access
setting for new TACACS users. (Defaults; Administrator and SuperUser = All
Plugs On, User = undefined, ViewOnly = undefined)
Notes:
• PowerControlfunctionsareonlyavailableonRSM-8R8Seriesunits.The
PlugAccessparameterisnotavailableonstandardTSMSeriesunitsor
standardRSMSeriesunits.
• AdministratorandSuperUserlevelaccountsalwayshaveaccesstoallplugs.
• Userlevelaccountswillonlyhaveaccesstotheplugsthataredefinedviathe
"PlugAccess"parameter.
• ViewOnlyaccountsareallowedtoviewtheOn/Offstatusofpermittedplugs,
butarenotallowedtoinvokeswitchingandrebootcommands.
 PlugGroupAccess: (RSM-8R8 Series Units Only) Determines the default Plug
Group Access setting for new TACACS users. For more information, please refer
to Section 5.6. (Defaults; Administrator and SuperUser = All Plug Groups On,
User = undefined, ViewOnly = undefined)
Notes:
• PowerControlfunctionsareonlyavailableonRSM-8R8Seriesunits.The
PlugGroupAccessparameterisnotavailableonstandardTSMSeriesunits
orstandardRSMSeriesunits.
• Inordertousethisfeature,PlugGroupsmustfirstbedefinedasdescribedin
Section5.6.
• AdministratorandSuperUserlevelaccountswillalwayshaveaccesstoall
pluggroups.
• UserLevelaccountswillonlyhaveaccesstothepluggroupsthatare
definedviathePlugGroupAccessparameter.
• ViewOnlyaccountsareallowedtoviewthestatusofpermittedPlugGroups
butarenotallowedtoinvokeswitchingandrebootcommands.