EasyManua.ls Logo

Xerox WorkCentre 5022 - Page 159

Xerox WorkCentre 5022
698 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
06/2014
2-137
WC 5022/5024
093-312 Toner Dispense Motor Rotation Fail
Status Indicator RAPs
Version 1.0
093-312 Toner Dispense Motor Rotation Fail
BSD-ON: CH9.2
Regardless of low usage of toner from Toner Cartridge, it was detected to be empty.
Cause/Action
Check the following:
The Toner Cartridge for improper installation
The Toner Dispense Motor (Output Check [092-001]) for operation failure. (PL 8.2)
The Toner transport path for Toner blockage.
The Drive Gear for wear and damage.
If no problem is found, replace the following parts in sequence:
Toner Cartridge (PL 8.1)
ESS/MCU PWB (PL 18.3)
093-400 Toner Near Empty
BSD-ON: CH9.2
The Toner Cartridge needs to be replaced soon.
Cause/Action
The Toner Cartridge needs to be replaced soon. Replace the Toner Cartridge as required. (PL
8.1)

Table of Contents

Other manuals for Xerox WorkCentre 5022

Related product manuals