06/2014
2-165
WC 5022/5024
2.3.1 Interface (Physical/Logical)
Status Indicator RAPs
Version 1.0
2.3.1 Interface (Physical/Logical)
1. Physical Interface Description
The following physical interfaces are supported.
a. USB 2.0
b. Ethernet (10BaseT, 100BaseTX) *1
*1: Has the features to automatically detect and switch the transmission speed (10Mbps,
100Mbps). Also, the transmission speed can be fixed by settings.
2. Logical Interface Description
It is possible to set whether to activate the system for each of the following logical inter-
faces.
Supported for receiving print jobs
a. USB
b. LPD
c. Port9100
Supported for management interface
a. SNMP
b. CWIS
2.3.2 'Cannot connect to the network' or 'Print is not found
from the PC'
Get 'NET Connection Diagram' and take actions by following the instructions in '2.3.5 Network-
Related Details Check Flow' in this document, and then collect the following information:
• System Settings List
• Check the client settings (Output Port)
• Physical interface check
• Logical interface check
• Other connection environment check
Printer switching machine
Availability of printer buffer, etc.
HUB (Switch, Hub) used, etc.
• Network Capture Log
To Next Page
Loading...
