Xerox WorkCentre 5022 - Page 688

06/2014
9-20
WC 5022/5024
9.1.8 Fax Kit
Version 1.0
Installation/Removal
Figure 9 j0mg91014
13. Reinstall the Fusing Unit Cover.
14. Close the Front Toner Cover.
15. Remove the STM Connector Cover. (Figure 10)
a. Remove the screw (x2).
b. Remove the STM Connector Cover.
Figure 10 j0mg91902
16. Install the Fax Box. (Figure 11)
a. Install the Fax Box.
b. Secure it by using the screw (x2).
Figure 11 j0mg91015
17. Attach the wire harness. (Figure 12)
a. Connect the wire harness to the connector of the Fax Box.
b. Secure the wire harness by using the clamp (x2) of the Fax Box.
Figure 12 j0mg91016
18. Pass the USB Cable and wire harness of the Fax Box through the hole of the Fax Box
Cover. (Figure 13)
a. Pass the USB Cable and wire harness through the hole.