Next Step
49
Chapter 2 Trying It Out
Chapter 2
13.
Turn Knob 3 to select <PASTE>.
14.
Press Knob 3 (<PASTE>).
▼The name that you just entered (Voice AH) is “pasted” into the name field.
Memo
Use the paste function to simplify the work of entering names. This feature lets you reinput a previ-
ous character string with a single press on the knob.
15.
Turn Knob 1 to move the cursor to the next to last letter of the displayed name
(A).
16.
Turn Knob 2 to change the A into an E. Then turn Knob 1 to advance to the
last letter (H), and turn Knob 2 again to change this into another E.
17.
Press Knob 5 (>OK).
▼ This completes the name change. The original screen reappears.
18.
Now repeat Steps 11 to 17 to change the name for your third sample from
_NewSample 2 to Voice OH.
To Next Page
