Yamaha A3000 User Manual

Sample Editing
54
Chapter 2 Trying It Out
Using a Filter
We will now set up a filter for the eeeee sample. The filter settings should produce a
significant change in the sample’s sound.
Procedure
1.
Select EDIT mode, and then select the FILTER function.
2.
Press Knob 1, and then turn Knob 2 or Knob 3 to select the Voice EE sample
for editing. Then press Knob 1 again.
3.
Turn Knob 1 to select the Filter screen. Then turn Knob 2 to set Type to HiPass1.
Turn Knob 3 to set Cutoff to 100.
▼The screen should now look like this.
4.
Now play a key between C3 and B3 at your keyboard.
▼Notice how the filter has eliminated the low-frequency components of the eeeee sound.
Memo
The A3000 offers a variety of filter types. You can select from among two high-pass filters (HiPass1,
HiPass2), two low-pass filters (LowPass1, LowPass2), a band-pass filter (BandPass), and a band-
eliminate filter (BandElim).
PLAY
EDIT
REC
DISK
UTILITY
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI

Yamaha A3000 Specifications

General

Sampling Rate	44.1kHz
MIDI	In/Out/Thru
Type	Sampler
Effects	Reverb, Chorus, Delay
Display	LCD
Storage	Floppy disk drive