YAMAZAKI MAZAK VORTEX i Series User Manual

MACHINE INFORMATION 2
2-17
5. INTEGREX e-H-S
[min
-1
]
Machine specification
Spindle No. 1
Standard
Spindle No. 1
Option
Spindle No. 2
Standard
Spindle No. 2
Option
e-420H-S
1500U
35 to 4000
35 to 2500
35 to 4000
35 to 2500
3000U
e-500H-S
1500U
35 to 3300
35 to 1600
35 to 3300
35 to 3300
3000U
e-670H-S
3000U
4 to 1600
3 to 1000
4 to 1600
4 to 1600
4000U
Machine specification
Mill Spindle
(12000min
-1
)
Standard
Mill Spindle
(20000min
-1
)
Option
e-420H-S
1500U
35 to 12000
-
3000U
e-500H-S
1500U
35 to 10000
3000U
e-670H-S
3000U
25 to 5000
4000U
Remark: 3000 min
-1
is upper limit value during tapping cycle.
* The data are value for the following specifications:
 e-420H-S : Spindle through hole diameter 91
 e-500H-S : Spindle through hole diameter 104
 e-670H-S : Spindle through hole diameter 170
6. INTEGREX e-H-ST
[min
-1
]
Machine specification
Spindle No. 1
Standard
Spindle No. 1
Option
Spindle No. 2
Standard
Spindle No. 2
Option
e-420H-ST
2000U
35 to 4000
35 to 2500
35 to 4000
35 to 2500
Machine specification
Mill Spindle
(12000min
-1
)
Standard
Mill Spindle
(20000min
-1
)
Option
Lower turret (Note)
e-420H-ST
2000U
35 to 12000
-
35 to 6000
Note: Only turret for milling (option).
Remark : 3000 min
-1
is upper limit value during tapping cycle.
* The data are value for the following specifications:
 e-420H-ST : Spindle through hole diameter 91
Serial No. 294060
Copyright (c) 2013 YAMAZAKI MAZAK CORPORATION. All rights reserved.
Serial No. 294060

YAMAZAKI MAZAK VORTEX i Series Specifications

General

Brand	YAMAZAKI MAZAK
Model	VORTEX i Series
Category	Computer Hardware
Language	English