YASKAWA SGDH - Dimensional Drawings of Base-Mounted SERVOPACK Model; Single-Phase 100 V: 30 W;50 W;100 W (A3 BE;A5 BE;01 BE); Single-Phase 200 V: 30 W;50 W;100 W;200 W (A3 AE;A5 AE;01 AE;02 AE)

4 SERVOPACK Specifications and Dimensional Drawings
4.7.1 Single-phase 100 V: 30 W/50 W/100 W (A3BE/A5BE/01BE) Single-phase 200 V: 30 W/50 W/100 W/200 W (A3AE/A5AE/01AE/02AE)
4-24
4.7 Dimensional Drawings of Base-mounted SERVOPACK Model
4.7.1 Single-phase 100 V: 30 W/50 W/100 W (A3BE/A5BE/01BE)
Single-phase 200 V: 30 W/50 W/100 W/200 W (A3AE/A5AE/01AE/02AE)
External Terminal Connector
SERVOPACK Connector
Connector
Symbol
SERVOPACK
Connector Model
Manufacturer
CN1 10250-52A2JL Sumitomo 3M Co., Ltd.
CN2 53460-0611 Molex Japan Co., Ltd.
CN3 10214-52A2JL Sumitomo 3M Co., Ltd.
Ground terminal
2×M4 screws
(Mounting pitch)
160 (6.30)
5 (0.20)
5.5
(0.22)
149.5±0.5 (5.89±0.02)
CN3
CN2
CN1
55 (2.17)
160 (6.30)
10 (0.39)
6
(0.24)
6 (0.24)
130 (5.12)
75 (2.95)
17
(0.67)
(5)
(0.20)
YASKAWA
YASKAWA
SERVOPACK
SGDH-
39 (1.54)
106 (4.17)
8 (0.31)
7 (0.28)
91.5 (3.60)
2×M4 screw holes
Mounting Hole Diagram
Terminal
block
55 (2.17)
CN10
Nameplate
Units: mm (in)
Approx. mass: 0.8 kg (1.76 lb)
MODE/SET
CHARGE POWER
DATA/
L1 L2
Main circuit
power supply
Control power
supply
Single-phase
100/200 VAC
50/60 Hz
L1C L2C
Single-phase
100/200 VAC
50/60 Hz