5.2 Servomotor Main Circuit Wire Size and Connectors
5-25
5
(b) Brake Power Supply Connectors
The specifications are same for both three-phase 200 V and 400 V servomotors.
Connectors for the brake power supply for 200 V 0.45 kW to 4.4 kW servomotors are not available, because
the connectors for the main circuit can be used for this purpose.
• Three-phase 200 V 5.5 to 15.0 kW
• Three-phase 400 V 0.45 to 15.0 kW
Capacity (kW)
Connector on
Servomotor
Plug
Cable Clamp
Applicable Cable
Range in mm (in)
(For reference)
Three-phase
200 V
Three-phase
400 V
Straight L-shaped
5.5
7.5
11.0
15.0
0.45
0.85
1.3
1.8
2.9
4.4
5.5
7.5
11.0
15.0
CE05-2A10SL-
3PC-B
CE05-6A10SL-3SC-
B-BSS
CE05-8A10SL-3SC-
B-BAS
CE3057-4A-1
φ 3.6 (φ0.14) to φ5.6
(φ0.22)
To Next Page
Loading...
