n Via EnterCode you can specify a key code to output the keyboard buffer at Output for
one cycle. During this time the output Valid is enabled.
n Via edge change 0-1 of Clear the keyboard buffer cleared.
n Via TimeAutoClear you specify the max. duration for pressing the keys. Otherwise the
keyboard buffer is cleared.
n Via CountCharAutoEnter you can specify the number of characters, which are auto-
matically output as keyboard buffer at Output for one cycle. During this time the
output Valid is enabled.
n Error is activated for the time TimeError when a key is pressed, but the keyboard
buffer is full.
n With TimeDebounce you can specify a debounce time for the input signals.
Parameters
Parameter Declaration Data type Description
Row1 INPUT BOOL Row 1 of the keyboard matrix.
Default: FALSE
Row2 INPUT BOOL Row 2 of the keyboard matrix.
Default: FALSE
Row3 INPUT BOOL Row 3 of the keyboard matrix.
Default: FALSE
Row4 INPUT BOOL Row 4 of the keyboard matrix.
Default: FALSE
Column1 INPUT BOOL Column 1 of the keyboard matrix.
Default: FALSE
Column2 INPUT BOOL Column 2 of the keyboard matrix.
Default: FALSE
VIPA SPEED7
Building Control
Access Control > FB 49 - KEYPAD - Keyboard
HB00 | OPL_SP7 | Operation list | en | 18-30 110
To Next Page
Loading...
