n VMC_AxisControl ... Trend
– Template for controlling the FB 860 - VMC_AxisControl function block in the CPU,
which additionally shows the graphic trend of the drive.
– The use of this template can affect the performance of the panel.
– The template is available for different display resolutions.
n VMC_AxisControl_PT
– Template for controlling the FB 875 - VMC_AxisControl_PT function block in the
CPU, which drive is connected via Pulse Train.
– The template is available for different display resolutions.
Please note that currently no ECO panels are supported!
1. Go to the service area of www.vipa.com.
2. Download the ‘Symbol library for Movicon’ from the download area at ‘VIPA Lib’ .
3. Specify a target directory in which the blocks are to be stored and start the unzip
process with [OK].
4. Open the library after unzipping and drag and drop the Symbol library ‘vipa simple
motion control VX.X.X.msxz’ and the Language table ‘vipa simple motion control
VX.X.X.CSV’ to the Movicon unser directory ...\Public\Documents\Progea\Movicon
\Symbols.
ð
After restarting Movicon, the symbol library is available in Movicon via the
‘Symbol libraries’ .
In order for the texts of the templates to be displayed correctly, you must import
the language table into your project.
Ä
‘Import voice table’ page 620
13.8.2 Create a new project
1.
Start Movicon and open the project wizard via ‘File è New’.
2. Select ‘Win32/64 platform’ as target platform and click at [Open].
ð
The dialog ‘Device properties’ opens.
Installation in Movicon
Create a project
VIPA SPEED7
Motion control - Simple Motion Control Library
Controlling the drive via HMI > Create a new project
HB00 | OPL_SP7 | Operation list | en | 18-30 614
To Next Page
Loading...
