17.23 Module diagnostic information via logical address - SSL-ID: 00B3h
If you read this partial list, you obtain all the diagnostic data of a module. You can also
obtain this information for PROFIBUS DP and submodules. The diagnostic record 1 con-
tains the 4 bytes of diagnostic data that are also in data record 0, plus module-specific
diagnostics data that describe the state of a channel or a channel group. The module is to
be specified via the logical base address.
Content Value Description
SSL_ID 00B3h Shows all the diagnostic data of a module.
INDEX xxxxh Here the following is to be specified via INDEX:
n Bit 0 ... 14: Logical base address of the module
n Bit 15:
– 0: Input
– 1: Output
LENTHDR xxxxh The length of the record set depends on the module.
N_DR 0001h Number of record set (1)
Information to length and structure of the diagnostic data may be found in
the corresponding manual of your diagnosable module.
Description
Header
Record set
VIPA SPEED7
SSL System status list
Module diagnostic information via logical address - SSL-ID: 00B3h
HB00 | OPL_SP7 | Operation list | en | 18-30 991
To Next Page
Loading...
