2 Important notes
2.1 General
In the following, you will find important notes, which must always be
observed when using the blocks.
2.2 Internally used blocks
CAUTION!
The following blocks are used internally and must not be overwritten! The
direct call of an internal block leads to errors in the corresponding
instance DB! Please always use the corresponding function for the call.
FC/SFC Designation Description
FC/SFC 192 CP_S_R is used internally for FB 7 and FB 8
FC/SFC 196 AG_CNTRL is used internally for FC 10
FC/SFC 200 AG_GET is used internally for FB/SFB 14
FC/SFC 201 AG_PUT is used internally for FB/SFB 15
FC/SFC 202 AG_BSEND is used internally for FB/SFB 12
FC/SFC 203 AG_BRCV is used internally for FB/SFB 13
FC/SFC 204 IP_CONF is used internally for FB 55 IP_CONF
FC/SFC 205 AG_SEND is used internally for FC 5 AG_SEND
FC/SFC 206 AG_RECV is used internally for FC 6 AG_RECV
FC/SFC 253 IBS_ACCESS is used internally for SPEED bus INTERBUS masters
SFB 238 EC_RWOD is used internally for EtherCAT Communication
SFB 239 FUNC is used internally for FB 240, FB 241
VIPA SPEED7
Important notes
Internally used blocks
HB00 | OPL_SP7 | Operation list | en | 18-30 15
To Next Page
Loading...
