YASKAWA VIPA SPEED7 - Usage in VIPA SPEED7 Studio

13.4.3.2 Connecting the V1000 outputs
The following figure shows an example application for connecting the outputs of a V1000
inverter drive to a System MICRO CPU M13C.
R Resistor
Value: 4.7kΩ
Power dissipation: min. 0.25W
Resistance example: Carbon film resistor 0207 wired with 0.25W power dissipation
13.4.4 Usage in VIPA SPEED7 Studio
13.4.4.1 Hardware configuration
Please use the SPEED7 Studio V1.7.1 and up for the configuration.
Sample application
Add CPU in the project
VIPA SPEED7
Motion control - Simple Motion Control Library
Usage inverter drive via PWM > Usage in VIPA SPEED7 Studio
HB00 | OPL_SP7 | Operation list | en | 18-30 433