17.11 Communication status data - SSL-ID: xy32h
If you read this partial list you obtain the status data of the CPU communication section.
Content Value Description
SSL_ID 0132h Reading the diagnostic information
0F32h SSL partial list header information
INDEX 0001h General of communication status data.
0002h TIS status data
0004h Protection status data
0006h Data exchange via communication SFB
0008h Time system (16bit Run-time meter 0 ... 7)
0009h MPI status data
000Ah K-Bus status data
000Bh Time system (32bit Run-time meter 0 ... 7)
LENTHDR 0028h A record set is 20words long (40bytes)
The assignment depends on the INDEX parameter
N_DR xxxxh Number of record sets
SSL_ID: 0132h INDEX: 0001h
The partial list extract contains information about general of communication status data.
INDEX
offset
Length Description
0 1word General condition data for communication
2 1word Reserved number of PG connections (Default = 1)
4 1word Reserved Number of OP connections (Default = 1)
6 1word Number of occupied PG connections
8 1word Number of occupied OP connections
10 1word Number of configured S7 connections (Default = 0)
12 1word Number of occupied S7 connections
14 1word Number of unused connection resources
16 1word reserved
18 1word Max. preset communication load of the CPU in % (Default = 20%)
20 7words reserved (0000h)
34 1byte Reserved number S7 basic communication connections (Default = 0)
35 1byte Number of occupied S7 basic communication connections (XPut/XGet/MPI)
Description
Header
Record set
VIPA SPEED7
SSL System status list
Communication status data - SSL-ID: xy32h
HB00 | OPL_SP7 | Operation list | en | 18-30 957