Additional status information OB 61
INDEX
offset
Length Description
0 2 Bytes Processing identifiers
n Bit 0: Interrupt event is caused by parameters:
– 0: enabled
– 1: disabled
n Bit 1: Interrupt event as per SFC 39 DIS_IRT:
– 0: not locked
– 1: locked
n Bit 2:
(Generation job ready for time interrupts, time-of-day/time-delay interrupt OB started,
cyclic interrupt OB was configured)
– 0 = not active
– 1 = Interrupt source is active
n Bit 4: Interrupt OB:
– 0: is not loaded
– 1: is loaded
n Bit 5: Interrupt OB is by TIS:
– 0: enabled
– 1: disabled
n Bit 6: Entry in diagnostic buffer:
– 0: enabled
– 1: disabled
n Bit 15 ... 7: reserved
2 2 Bytes Reaction with not loaded / locked OB
n Bit 0: 1: Lock interrupt source
n Bit 1: 1: Generate interrupt event error
n Bit 2: 1: CPU goes into STOP mode
n Bit 3: 1: Interrupt only discarded
n Bit 15 ... 4: reserved
4 4 Bytes Discard by TIS functions
n Bit number x set means:
– The event number that is larger than the smallest event to x the according event
number is discard by TIS function.
VIPA SPEED7
SSL System status list
Interrupt status - SSL-ID: xy22h
HB00 | OPL_SP7 | Operation list | en | 18-30 956
To Next Page
Loading...
