YASKAWA VIPA SPEED7 - FC 313 - FM_CALC_SPEED - Calculate Rotational Speed

Code Description
0x80DB Channel 1: Measured time value = 0
0x80DC Channel 0: Measured time value < 0
0x80DD Channel 1: Measured time value < 0
0x80DE Channel 0: Measured time value > 0x7FFFFFF
0x80DF Channel 1: Measured time value > 0x7FFFFFF
0x80E2 Channel 0: Determined number of edges < 0
0x80E3 Channel 1: Determined number of edges < 0
0x80E4 Channel 0: Determined number of edges > 0xFFFFFF
0x80E5 Channel 1: Determined number of edges > 0xFFFFFF
0x80E6 Channel 0: Frequency > 600kHz
0x80E7 Channel 1: Frequency > 600kHz
0x80E8 Channel 0: No valid measurement within the entered measurement period.
0x80E9 Channel 1: No valid measurement within the entered measurement period.
12.1.10 FC 313 - FM_CALC_SPEED - Calculate rotational speed
With the FC 313 FM_CALC_SPEED, you can calculate the velocity of the input signals of
both channels. Since this FC does not internally call a block for consistent read access of
data, you have to ensure consistent data transfer in your system.
Parameters
Parameter Declaration Data type Memory block Description
FM_PERIOD_CH0 INPUT DWORD I, Q, M, D, L Actual value of frequency meas-
urement module input address:
+0
FM_PERIOD_CH1 INPUT DWORD I, Q, M, D, L Actual value of frequency meas-
urement module input address:
+8
FM_RISING_EDGES_CH0 INPUT DWORD I, Q, M, D, L Actual value of frequency meas-
urement module input address:
+4
FM_RISING_EDGES_CH1 INPUT DWORD I, Q, M, D, L Actual value of frequency meas-
urement module input address:
+12
FM_STATUS_CH0 INPUT WORD I, Q, M, D, L Actual value of frequency meas-
urement module input address:
+16
FM_STATUS_CH1 INPUT WORD I, Q, M, D, L Actual value of frequency meas-
urement module input address:
+18
Description
VIPA SPEED7
Device Specific
Frequency Measurement > FC 313 - FM_CALC_SPEED - Calculate rotational speed
HB00 | OPL_SP7 | Operation list | en | 18-30 262