YASKAWA VIPA SPEED7 - 5 Include VIPA Library

5 Include VIPA library
The VIPA specific blocks can be found as library ‘...LIB’ for download in the service area
of www.vipa.com at ‘Downloads’ . The libraries are packed ZIP files. As soon as you want
to use VIPA specific blocks you have to import them into your project. The VIPA specific
blocks can be found in the libraries according to its applications:
n General functions
–
Ä Chap. 7 ‘Building Control’ page 102
– Ä Chap. 8 ‘Network Communication’ page 114
–
Ä Chap. 10 ‘Serial Communication’ page 203
– Ä Chap. 11 ‘EtherCAT Communication’ page 238
–
Ä Chap. 15 ‘Standard’ page 795
– Ä Chap. 16 ‘System Blocks’ page 883
n Simple Motion Control
–
Ä Chap. 13 ‘Motion control - Simple Motion Control Library’ page 287
n Modbus
–
Ä Chap. 9 ‘Modbus Communication’ page 183
n Energy and frequency measurement
This library is only available for the Siemens SIMATIC Manager.
–
Ä Chap. 12 ‘Device Specific’ page 246
5.1 Integration into Siemens SIMATIC Manager
The integration into the Siemens SIMATIC Manager requires the following steps:
1. Load ZIP file
2. "Retrieve" the library
3. Open library and transfer blocks into the project
Navigate on the web page to the desired ZIP file, load and store it in your work
directory.
1. Start the Siemens SIMATIC Manager with your project.
2.
Open the dialog window for ZIP file selection via ‘File è Retrieve’.
3. Select the according ZIP file and click at [Open].
4. Select a destination folder where the blocks are to be stored.
5. Start the extraction with [OK].
1. Open the library after the extraction.
2. Open your project and copy the necessary blocks from the library into the directory
"blocks" of your project.
ð
Now you have access to the VIPA specific blocks via your user application.
Are FCs used instead of SFCs, so they are supported by the VIPA CPUs
starting from firmware 3.6.0.
Libraries
Overview
Load ZIP file
Retrieve library
Open library and transfer
blocks into the project
VIPA SPEED7
Include VIPA library
Integration into Siemens SIMATIC Manager
HB00 | OPL_SP7 | Operation list | en | 18-30 69