17.9 Identification of the component - SSL-ID: xy1Ch
If you read the partial list you can identify the CPU or the automation system.
Content Value Description
SSL_ID 001Ch Identification of all components
011Ch Identification of one component
0F1Ch SSL partial list header information
INDEX 0001h Name of the automation system
0002h Name of the module
0003h Plant identification of the module
0005h Serial number of the module
0006h Reserved for the operating system
0007h Module type name
0008h Serial number of the memory card - CID without CardType
000Ah OEM identification of the module
000Bh Location identifier of the module
00E0h Serial number at the key file in the activated memory card (only at SSL_ID 011Ch)
00E1h Serial number at the key file in the plugged memory card (only at SSL_ID 011Ch)
00FFh Serial number of the memory card - CID with CardType (only at SSL_ID 011Ch)
LENTHDR xxxxh
n INDEX < 00E0h
– A record set is 17words long (34byte)
n INDEX = 00E0h, 00E1h
– A record set is 5words long (10byte)
n INDEX = 00FFh
– A record set is 19words long (38byte)
N_DR Number of record sets
0009h at SSL_ID: 001Ch
0001h at SSL_ID: 011Ch
SSL_ID: xy1Ch INDEX: 0001h
INDEX
offset
Length Description
0 1word INDEX SSL_ID: 011C: Identifier of the component: 0001h
2 12words Name of the automation system (max. 24 characters)*
26 4words reserved
*) If names and designations are shorter than the corresponding max. characters, the gaps are filled with 00h.
Description
Header
Record set
VIPA SPEED7
SSL System status list
Identification of the component - SSL-ID: xy1Ch
HB00 | OPL_SP7 | Operation list | en | 18-30 949
To Next Page
Loading...
