Code Description
0000h OK
7000h REQ = 0, BUSY = 0 (nothing present)
7001h REQ = 1, 1. call
7002h Block is executed
8010h Parameter FILENAME is not present (e.g. DB not loaded)
8011h Error FILENAME (not conform with 8.3 or special character)
8100h The defined HANDLE is not valid
9001h HANDLE is assigned to another file
9002h Another function has been called via this HANDLE and is ready
9003h Another function has been called via this HANDLE and is not ready
A000h System internal error occurred
A001h The defined MEDIA type is not valid
A003h A general error in the file system occurred
A004h No root-entry is available in the directory
A005h Memory card is write-protected
A100h General file system error (e.g. no memory card plugged)
16.3.5 FC/SFC 210 - FILE_CLO - Close file
This block allows you to close an opened file. Here an EOF (End of File) is added, the file
is closed and the HANDLE released. REQ = 1 initializes the function.
Parameters
Parameter Declaration Data type Description
REQ IN BOOL Activate function
HANDLE IN INT Index of file 0 ... 3
RETVAL OUT WORD Return value (0 = OK)
BUSY OUT BOOL Function is busy
Description
VIPA SPEED7
System Blocks
File Functions SPEED7 CPUs > FC/SFC 210 - FILE_CLO - Close file
HB00 | OPL_SP7 | Operation list | en | 18-30 914
To Next Page
Loading...
