YASKAWA VIPA SPEED7 - SFC 234 - RESET - Reset Page Frame

16.1.7 SFC 234 - RESET - Reset page frame
The RESET ALL function is called via the order number 0. This resets all orders of this
logical interface, e.g. deletes all order data and interrupts all active orders. With a direct
function (ANR ¹ 0) only the specified order will be reset on the logical interface. The block
depends on the RLO and may be called from cyclic, time or alarm controlled program
parts.
Parameters
Name Declaration Type Description
SSNR IN INT Interface number
ANR IN INT Job number
PAFE OUT BYTE Parameterization error
The block has two different operating modes:
n RESET ALL
n RESET DIRECT
Description
Operating modes
VIPA SPEED7
System Blocks
Fetch/Write Communication > SFC 234 - RESET - Reset page frame
HB00 | OPL_SP7 | Operation list | en | 18-30 901