YASKAWA VIPA SPEED7 - RAM to WLD - WLD

Addr. Name Type Start value Current value Comment
4.0 Object(1).Index WORD
6.0 Object(1).Subindex BYTE
7.0 Object(1).Write_Length BYTE
8.0 Object(1).Data_Write DWORD
12.0 Object(1).Data_Read DWORD
16.0 Object(1).State BYTE
18.0 Object(2).Group WORD 2. Object
... ... ...
34.0 Object(2).State BYTE
36.0 Object(3).Group WORD 3. Object
... ... ...
52.0 Object(3).State BYTE
... ... ... ...
12.4 RAM to WLD - "WLD"
12.4.1 FB 240 - RAM_to_s7prog.wld - RAM to s7prog.wld
With REQ = TRUE this block copies the currently loaded project of a CPU on an inserted
memory card as s7prog.wld. With a SPEED7 CPU from VIPA the s7prog.wld is automati-
cally read from an inserted memory card always after an overall reset. The FB 240 inter-
nally calls the block SFB 239 with the corresponding parameters. Here the values of
BUSY and RET_VAL are returned from the SFB 239 to the FB 240.
Please note that this block is not part of the library for the Siemens TIA
Portal.
Parameters
Parameter Declaration Data type Memory area Description
REQ IN BOOL I, Q, M, D, L Function request with REQ = 1
BUSY OUT BOOL I, Q, M, D, L Return value of the SFB 239
RET_VAL OUT WORD I, Q, M, D, L Return value of the SFB 239
12.4.2 FB 241 - RAM_to_autoload.wld - RAM to autoload.wld
With REQ = TRUE this block copies the currently loaded project of a CPU on an inserted
memory card as autoload.wld. With a SPEED7 CPU from VIPA the s7prog.wld is auto-
matically read from an inserted memory card always after PowerON. The FB 241 inter-
nally calls the block SFB 239 with the corresponding parameters. Here the values of
BUSY and RET_VAL are returned from the SFB 239 to the FB 241.
Description
Description
VIPA SPEED7
Device Specific
RAM to WLD - "WLD" > FB 241 - RAM_to_autoload.wld - RAM to autoload.wld
HB00 | OPL_SP7 | Operation list | en | 18-30 280