15.6 Time Functions
15.6.1 UDT 60 - WS_RULES - Rule DB
Your system must provide certain information in a DB that is evaluated by the various
blocks. You create this data block as a DB of the type UDT60 and enter the values that
apply to your location (in local time!).
Calculation of base time < - > local time and "set alarm acc. to local time"
Name Type Start value Comment
B2L STRUCT Base time < - > Local time
S INT 2 Offset base time -> local time [30 min] in winter
permitted: -24 .. +24.
T INT 3 Difference summer to winter time [30 min]
permitted: 2
Block Diagram
Description
VIPA SPEED7
Standard
Time Functions > UDT 60 - WS_RULES - Rule DB
HB00 | OPL_SP7 | Operation list | en | 18-30 878
To Next Page
Loading...
