3. Specify a project name at ‘Name’ .
Specify at ‘Folder’ a storage area.
Leave all settings disabled and click at [Next].
ð
The dialog ‘Users’ opens.
4. Make the appropriate user settings, if desired, or enable only ‘CRF-21-Part...’ and
click at [Next].
ð
The dialog ‘Add Comm. I/O Driver’ opens.
VIPA SPEED7
Motion control - Simple Motion Control Library
Controlling the drive via HMI > Create a new project
HB00 | OPL_SP7 | Operation list | en | 18-30 615
To Next Page
Loading...
