5. Since the connection to the CPU is via TCP/IP, enable in the ‘List Available
Comm.Drivers’ the driver ‘VIPA’ > ‘Ethernet S7 TCP’ and click at [Next].
ð
The dialog ‘Screens’ opens.
6. Enter 2 screens and their size, which matches your panel and click at [Next].
ð
The dialog ‘Data base settings (ODBC)’ opens.
7. If you want a database connection, you can make the corresponding settings here.
Otherwise, click at [Next].
ð
The dialog ‘Data logger and recipe settings (ODBC)’ opens.
8. If templates are to be generated, you can make the corresponding settings here.
Otherwise, click at [Next].
ð
The dialog ‘Alarm settings’ opens.
VIPA SPEED7
Motion control - Simple Motion Control Library
Controlling the drive via HMI > Create a new project
HB00 | OPL_SP7 | Operation list | en | 18-30 616
To Next Page
Loading...
