9. If alarms are to be generated, you can make the corresponding settings here. Oth-
erwise, click at [Finish].
ð
Your project is created with the settings you have made and the settings dialog
for the ‘S7TCP’ communication driver opens automatically.
10. Select the register ‘Stations’ .
11. To add a new station, click [+ Add].
ð
The dialog ‘Station Properties’ opens.
VIPA SPEED7
Motion control - Simple Motion Control Library
Controlling the drive via HMI > Create a new project
HB00 | OPL_SP7 | Operation list | en | 18-30 617
To Next Page
Loading...
