12. Enter a station name at ‘Station Name’ . You have to use this name for the screen
in the initialization dialog further below. Allowed characters: A-Z, a-z, 0-9 space and
the separators "_" and "-"
Enter at ‘Server Address’ the IP address of your CPU and click at [OK].
13. Negate the query for importing variables from the PLC database and close the
‘S7TCP’ dialog with [OK].
ð
The project and the workspace are now enabled for use. In the project at
‘Resourcen > SimpleMotion’ the standard elements were added by the fol-
lowing elements:
n Real Time DB
– Comm.Drivers
S7 TCP
n Screens
– Screen1
– Screen2
– Footer Buttons
VIPA SPEED7
Motion control - Simple Motion Control Library
Controlling the drive via HMI > Create a new project
HB00 | OPL_SP7 | Operation list | en | 18-30 618
To Next Page
Loading...
