ERROR STATUS Description
1 80A1h Communications error:
n FB 65 TCON was not yet called for the specified ID
n The specified connection is currently being terminated. Receiving over this connec-
tion is not possible.
n The interface is receiving new parameters.
1 80B3h The parameter for the connection type (connection_type parameter in the connection
description) is set to UDP. Please use the FB 68 TRCV.
1 80C3h The operating resources (memory) in the CPU are temporarily occupied.
1 80C4h Temporary communications error: The connection is currently being terminated.
1 8922h DATA parameter: Target area invalid: area does not exist in DB.
1 8924h DATA parameter: Range error in ANY pointer
1 8932h DATA parameter: DB number too large.
1 893Ah DATA parameter: Access to receive buffer not possible (e.g. due to deleted DB)
1 897Fh DATA parameter: Internal error, such as an invalid ANY reference
1 8F7Fh Internal Error (VIPA specific)
1 8xyyh
General error information
Ä
Chap. 4.2 ‘General and Specific Error Information
RET_VAL’ page 66
VIPA SPEED7
Network Communication
Open Communication > FB 64 - TRCV - Receiving Data - TCP native and ISO on TCP
HB00 | OPL_SP7 | Operation list | en | 18-30 121
To Next Page
Loading...
