EasyManua.ls Logo

YASKAWA VIPA SPEED7 - Page 123

YASKAWA VIPA SPEED7
1007 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameter Declaration Data type Memory area Description
ERROR OUTPUT BOOL I, Q, M, D, L ERROR status parameter:
n ERROR = 1: Error occurred during processing.
STATUS provides detailed information on the type
of error.
STATUS OUTPUT WORD M, D STATUS status parameter:
Error information
CONNECT IN_OUT ANY D Pointer to the associated connection description.
Ä
Chap. 8.1.6 ‘UDT 65 - TCON_PAR Data structure
for FB 65’ page 124
ERROR STATUS Description
0 0000h Connection is able to be established
0 7000h Call with REQ = 0, establishment of connection not initiated
0 7001h First call with REQ = 1, connection being established
0 7002h Follow-on call (REQ irrelevant), connection being established
1 8086h The ID parameter must not have value of zero.
0 8087h Maximal number of connections reached; no additional connection possible
1 8089h The CONNECT parameter does not point to a data block.
1 809Ah The CONNECT parameter points to a field that does not have the length of the data
structure for assigning connection (UDT 65).
1 809Bh The communication interface specified via local_device_id and next_staddr is not sup-
ported by the CPU.
1 80A1h Connection or port is already occupied by the user.
1 80A2h Local or remote port is occupied by the system.
1 80A3h Attempt being made to re-establish an existing connection.
1 80A4h IP address of the remote connection endpoint is invalid.
1 80A7h Communications error: you have called TDISCON before TCON was complete.
TDISCON must first complexly terminate the connection referenced by the ID.
1 80B4h In the ISO on TCP protocol, one or more of the following conditions have been violated
during passive connection setup:
n local_tsap_id_len ³ 02h
n local_tsap_id[1] = E0h at local_tsap_id_len = 02h
n local_tsap_id[1] an ASCII character local_tsap_id_len ³ 03h
n local_tsap_id[1] is an ASCII character and local_tsap_id_len ³ 03h
1 80B5h Parameter active_est (UDT 65) is TRUE with the protocol variant UDP.
1 80B6h Parameters connection_type is invalid (UDT 65).
Status information
VIPA SPEED7
Network Communication
Open Communication > FB 65 - TCON - Establishing a connection
HB00 | OPL_SP7 | Operation list | en | 18-30 123

Table of Contents

Related product manuals