YASKAWA VIPA SPEED7 - Page 141

DONE
(SEND)
NDR
(RECV)
ERROR STATUS Description
0 0 1 8091h Module start address not within double word grid.
0 0 1 8092h ANY reference contains type setting unequal BYTE.
- 0 1 80A0h Negative acknowledgement at reading from module.
0 0 1 80A4h reserved
0 0 1 80B0h Module doesn’t recognize the record set.
0 0 1 80B1h The length setting (in parameter LEN) is invalid.
0 0 1 80B2h reserved
0 0 1 80C0h Record set not readable.
0 0 1 80C1h The set record set is still in process.
0 0 1 80C2h There is a job jam.
0 0 1 80C3h The operating sources (memory) of the CPU are temporarily
occupied.
0 0 1 80C4h Communication error (occurs temporarily; a repetition in the
user application is reasonable).
0 0 1 80D2h Module start address is wrong.
At a reboot of the CP, the output parameters are set as follows:
n DONE = 0
n NDR = 0
n ERROR = 0
n STATUS = 8180h (at AG_RECV)
n STATUS = 8181h (at AG_SEND)
Status parameter at reboot
VIPA SPEED7
Network Communication
Ethernet Communication > FC 5 - AG_SEND - Send to CP 343
HB00 | OPL_SP7 | Operation list | en | 18-30 141