3. Select your Sigma-5 drive:
n SGDV-xxxxE5...
n SGDV-xxxxE1...
Confirm with [OK]. If your drive does not exist, you must install the corresponding
ESI file as described above.
ð
The Sigma-5 drive is connected to your EC-Mastersystem.
VIPA SPEED7
Motion control - Simple Motion Control Library
Usage Sigma-5/7 EtherCAT > Usage Sigma-5 EtherCAT
HB00 | OPL_SP7 | Operation list | en | 18-30 292
To Next Page
Loading...
