3.
Click at the screen ‘NumPad’ and adjust via ‘Context menu è Properties’ width
and height such as ‘Width’ = 400 and ‘Height’ = 700. Confirm with your settings.
4.
Select ‘View è Symbol Libraries’. Navigate in ‘Browse Folders’ at ‘vipa simple
motion control ...’ and drag & drop from the ‘Library view’ the ‘Numeric Touchpad’
template to the ‘NumPad’ , which matches the resolution of your panel.
5. If necessary, adjust its size.
6.
Click at ‘Resources > SimpleMotion’ and select ‘Context menu è Properties’.
VIPA SPEED7
Motion control - Simple Motion Control Library
Controlling the drive via HMI > Modify the project in Movicon
HB00 | OPL_SP7 | Operation list | en | 18-30 622
To Next Page
Loading...
