RETVAL Description depending on the BUSY-Bit BUSY
Bit 7...4:
0000: Job finished without an error 0
0111: Job still running 1
1000: Job finished with error 0
Job finished without an error
RETVAL Description depending on the BUSY-Bit BUSY
0000h Job was finished without an error. 0
Job finished with error
RETVAL Description depending on the BUSY-Bit BUSY
8002h: Oscilloscope-/FIFO function is not configured. 0
8003h: An internal error occurred - please contact VIPA. 0
8005h: The selected channel may not be read - wrong channel number. 0
8007h: The value at OFFSET exceeds the number of recorded values. 0
8090h: There is no SPEED-Bus module with this address available. 0
80D2h: LADR exceeds the peripheral address area. 0
VIPA SPEED7
System Blocks
System Functions > FC/SFC 193 - AI_OSZI - Oscilloscope-/FIFO function
HB00 | OPL_SP7 | Operation list | en | 18-30 925
To Next Page
Loading...
