YASKAWA VIPA SPEED7 - Page 960

INDEX
offset
Length Description
6 1word Run-time meter 0: time in hours
8 1word Run-time meter 1: time in hours
10 1word Run-time meter 2: time in hours
12 1word Run-time meter 3: time in hours
14 1word Run-time meter 4: time in hours
16 1word Run-time meter 5: time in hours
18 1word Run-time meter 6: time in hours
20 1word Run-time meter 7: time in hours
22 4words Current date and time (format: Date_and_Time)
30 1byte
n Bit x: Run-time meter x with 0 £ x £ 7
– 1: Run-time meter active
31 1byte reserved
32 1byte
n Bit x: Run-time meter overflow x with 0 £ x £ 7
– 1: overflow
33 1byte reserved
34 3words reserved
Status Time status
High byte Low byte
Bit number 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SG correction value - - hr su/wi - res - - sync
Bit Description Default
value
0 Synchronization failure
This parameter indicates whether the time transmitted in the frame from an external time
master is synchronized.
n 0: synchronization failed
n 1: synchronization occurred
Note:
Evaluation of this bit in a CPU is only useful if there is continuous external time synchro-
nization.
0
1 Parameter is not used. 0
2 Parameter is not used. 0
Time status
Status
VIPA SPEED7
SSL System status list
Communication status data - SSL-ID: xy32h
HB00 | OPL_SP7 | Operation list | en | 18-30 960