n Status information
– Here you get information about the states of the WebVisu, which are not error or
start-up obstacles and do not require any action.
n Start-up obstacles
– Start-up obstacle represent the error-free STOP states of the WebVisu.
They provide information about the preconditions, which are not met at start-up
the WebVisu.
n Errors
– Errors indicate STOP states due to an error. These are e.g. internal software
errors, errors when reading the project files and errors in the configuration of the
WebVisu.
Area Description
0x0000 - 0x0FFF Status information
0x1000 - 0x1FFF Start-up obstacle (no mistakes)
0x2000 - 0xDFFF reserved
0xE000 - 0xFFFF Error
Status code Description
0x0000 WebVisu is active / has started-up and can be opened.
0x0001 Loading WebVisu project.
0x0002 WebVisu server shuts down.
0x0003 WebVisu STOP requested.
0x0004 WebVisu server is down.
0x1000 WebVisu is not enabled, external memory card (VSD or VSC) is missing.
0x1001 WebVisu was disabled by the user.
0x1002 No WebVisu project available.
0x1003 No hardware configuration is loaded in the CPU.
0x1004 Invalid WebVisu configuration.
0xE000 Error initializing the file system.
0xE100 Error loading WebVisu project, project file too large.
0xE101 Failed to load the WebVisu project, project file may be corrupt.
0xE102 Failed to delete the WebVisu project.
0xE103 WebVisu project to delete was not found in the memory.
0xE104 CRC of the WebVisu project file is not correct.
0xE200 WebVisu server has terminated unexpectedly.
0xE201 Internal error - initialization failed step 1.
0xE202 Internal error - initialization failed step 2.
0xFFFF Unexpected internal error.
Status codes of the
WebVisu
VIPA SPEED7
SSL System status list
WebVisu diagnostic information - SSL-ID: xy3Eh
HB00 | OPL_SP7 | Operation list | en | 18-30 970
To Next Page
Loading...
