Printer Setup and Operation
39
10. Rotate the media guide adjustment knob as shown until the media guide just touches the edge of the
media.
11. Does the media that you are using require ribbon for printing? If you are not sure, see When to Use
Ribbon on page 45.
12. Rotate the printhead-open lever downward until it locks the printhead in place.
If using… Then…
Direct Thermal media (no ribbon needed) Continue with step 12.
Thermal Transfer media (ribbon needed)
a. If you have not already done so, load ribbon in
the printer. See Load the Ribbon on page 47.
b. Continue with step 12.
To Next Page
Loading...