Zebra ZT600 Series User Manual

Printer Setup and Operation
58
16. Click Next.
You are shown options that can take place when the wizard exits the installation.
17. Check the box that says “Run Zebra Setup Utilities now.”
18. Click Finish.
What the computer displays next depends on whether any Zebra printer drivers are already installed
on your computer. Follow the instructions based on what your computer displays.
If your computer... Then...
Did not previously
have any Zebra
printer drivers
installed
The System Prepare Wizard displays.
To connect by... Then...
USB port Continue with Connect a Computer to the Printer’s USB
Port onpage60.
Serial or optional
parallel port
Continue with Connect a Computer to the Printer’s Serial
or Parallel Port onpage63.

Zebra ZT600 Series Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Print Resolution	203 dpi/8 dots per mm; 300 dpi/12 dots per mm
Maximum Print Width	4.09 in./104 mm
Maximum Print Speed	14 ips (356 mm/s) for 203 dpi, 12 ips (305 mm/s) for 300 dpi
Media Sensors	Reflective and Transmissive
Communication	USB, Serial, Ethernet, Bluetooth
Memory	512 MB Flash
Operating Temperature	5°C to 40°C